![]() The pump then will pump the fuel through the line. ![]() Without dropping the tank, about the easiest is buy yourself some rubber fuel line at the autoparts store, disconnect the fuel filter, connect the hose, then turn the key on. Some of these guys are going to have real issues one day. A short piece of copper water line with a fitting on one end makes a good tool to hold the flapper open while inserting the hose.īest strategy is to practice on your vehicle, BEFORE you need to do it "for real" in an emergency. Some vehicles have a spring-loaded metal flap that closes over the filler neck. To start the siphon, an outboard motor fuel squeeze bulb works well - Temporarily insert it over the end of the hose to get the siphon started, and then quickly remove it one the fuel is flowing freely. I also carry several thicker lengths of clear PVC hose, for use on vehicles where it will work. The down side of using thin hose is that it takes forever to move any decent amount of gas through it! I use refrigerator water line for this purpose, with the inserted end cut at a sharp angle to make it less likely to snag on something while it's being inserted. Some vehicles have a "rollover valve" or screen in the filler hose that prevents any siphon hose from being inserted.Ī thin, rigid hose will work in some situations where thicker, softer hose won't. On some vehicles, the filler neck takes a really twisty path down to the gas tank - which makes it hard to get any sort of hose in. It depends a lot on how your Jeep is designed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |